No. 18 Jinhu Rd., Shuangfeng Development Zone, Hefei, Anhui, China 

sales@xuyang.cc

© 2018  Hefei Sunrise Aluminium Pigments Co.,Ltd 
皖ICP备11019742号-1  Powered by www.300.cn

News 

What should be paid attention to in the use of water-based aluminum slurry

2021-03-10
Page view:

What should be paid attention to in the use of water-based aluminum slurry?With the strict standard of environmental protection industry , the water-based coating industry has become one of the preferred targets for decoration, and its raw material is water-based aluminum powder.Then, what should be paid attention to in the use of water-based aluminum slurry?

What should be paid attention to in the use of water-based aluminum slurry?Before that, let's understand the characteristics of waterborne aluminum slurry.Waterborne aluminum paste is a kind of metal pigment, which is mainly used to add metal scintillation effect to the coating. The production process is mainly including passivation and silica coating process. The coating layer of waterborne aluminum paste made by silica coating process is relatively dense, and the storage time of the finished paint can keep one year.Due to the advantages of water-based aluminum slurry, such as good water resistance, excellent weather resistance, soluble in water and less gas release, it can be used in water-based coating system.It can be divided into the following two points in the process of use:

1. Before use: pre disperse the water-based aluminum powder slurry, soak it in the water-based silver slurry with deionized water (or distilled water or pure water) at a ratio of 1:1 for 5 minutes, and then stir it at a low speed until the dispersion is uniform.If the tap water is used, the tap water must be kept open for more than 24 hours to make full use of the residual chlorine in the tap water, because the free chlorine ion in the water has strong corrosiveness to silver paste.

2. When using: add the dispersed aluminum silver paste into the resin for mixing and stirring, and pay attention to the speed of stirring. Otherwise, the coating of aluminum silver paste will fall off, which will produce hydrogen or discharge VOC in direct contact with water. Therefore, the mixing time and speed should be controlled as far as possible.

The above is related knowledge. Hope to help you.